| range of product |
Altistart 22
|
|
|---|---|---|
| product or component type |
Soft starter
|
|
| product destination |
Asynchronous motors
|
|
| product specific application |
Pumps and fans
|
|
| component name |
ATS22
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
230…440 V – 15…10 %
|
|
| motor power kW |
15 kW 230 V
30 kW 400 V 30 kW 440 V |
|
| factory setting current |
57 A
|
|
| power dissipation in W |
59 W for standard applications
|
|
| utilisation category |
AC-53A
|
|
| type of start |
Start with torque control (current limited to 3.5 In)
|
|
| IcL starter rating |
62 A for connection in the motor supply line for standard applications
|
|
| IP degree of protection |
IP20
|
| assembly style |
With heat sink
|
|
|---|---|---|
| function available |
Internal bypass
|
|
| supply voltage limits |
195…484 V
|
|
| supply frequency |
50…60 Hz – 10…10 %
|
|
| network frequency |
45…66 Hz
|
|
| device connection |
To the motor delta terminals
In the motor supply line |
|
| [Uc] control circuit voltage |
230 V – 15…10 % 50/60 Hz
|
|
| control circuit consumption |
20 W
|
|
| discrete output number |
2
|
|
| discrete output type |
Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
|
| minimum switching current |
100 mA at 12 V DC (relay outputs)
|
|
| maximum switching current |
5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs |
|
| discrete input number |
3
|
|
| discrete input type |
(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
|
|
| discrete input voltage |
24 V <= 30 V
|
|
| discrete input logic |
Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
|
|
| output current |
0.4…1 Icl adjustable
|
|
| PTC probe input |
750 Ohm
|
|
| communication port protocol |
Modbus
|
|
| connector type |
1 RJ45
|
|
| communication data link |
Serial
|
|
| physical interface |
RS485 multidrop
|
|
| transmission rate |
4800, 9600 or 19200 bps
|
|
| installed device |
31
|
|
| protection type |
Phase failure: line
Thermal protection: motor Thermal protection: starter |
|
| marking |
CE
|
|
| type of cooling |
Forced convection
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
295 mm
|
|
| width |
145 mm
|
|
| depth |
207 mm
|
|
| net weight |
12 kg
|
|
| Motor power range AC-3 |
15…25 kW at 200…240 V 3 phases
30…50 kW at 380…440 V 3 phases |
|
| motor starter type |
Soft starter
|
| electromagnetic compatibility |
Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
|
|---|---|---|
| standards |
EN/IEC 60947-4-2
|
|
| product certifications |
C-Tick
CCC UL CSA GOST |
|
| vibration resistance |
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6 |
|
| shock resistance |
15 gn for 11 ms conforming to EN/IEC 60068-2-27
|
|
| noise level |
45 dB
|
|
| pollution degree |
Level 2 conforming to IEC 60664-1
|
|
| relative humidity |
0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
|
|
| ambient air temperature for operation |
-10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C) |
|
| ambient air temperature for storage |
-25…70 °C
|
|
| operating altitude |
<= 1000 m without derating
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m |
| Package 1 Weight |
8.388 kg
|
|
|---|---|---|
| Package 2 Weight |
64 kg
|
| Sustainable offer status |
Green Premium product
|
|
|---|---|---|
| REACh Regulation |
REACh Declaration
|
|
| EU RoHS Directive |
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration |
|
| Mercury free |
Yes
|
|
| RoHS exemption information |
Yes
|
|
| China RoHS Regulation |
China RoHS declaration
|
|
| Environmental Disclosure |
Product Environmental Profile
|
|
| Circularity Profile |
End of Life Information
|
|
| WEEE |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
|
| Warranty |
18 months
|
|---|
There are no reviews yet.