,

ATV340D18N4

Schneider Electric

Variable speed drive

18kW- 400V – 3 phases – ATV340

 

 

Compare
Main
range of product
Altivar Machine ATV340
product or component type
Variable speed drive
device application
Machine
device short name
ATV340
variant
Standard version
product destination
Asynchronous motors
Synchronous motors
type of cooling
Forced convection
supply frequency
50…60 Hz +/- 5 %
network number of phases
3 phases
[Us] rated supply voltage
380…480 V – 15…10 %
motor power kW
22 kW for normal duty
18.5 kW for heavy duty
apparent power
33.4 kVA at 480 V (normal duty)
36.1 kVA at 480 V (heavy duty)
communication port protocol
Modbus serial
IP degree of protection
IP20
nominal output current
39.0 A
relative symmetric network frequency tolerance
5 %
relative symmetric mains voltage tolerance
10 %
Complementary
mounting mode
Cabinet mount
motor power hp
30 hp for normal duty
25 hp for heavy duty
line current
54.7 A at 380 V without line choke (heavy duty)
43.4 A at 480 V without line choke (heavy duty)
49.9 A at 380 V with external line choke (normal duty)
40.2 A at 480 V with external line choke (normal duty)
54.5 A at 480 V with external line choke (heavy duty)
43.5 A at 380 V with external line choke (heavy duty)
prospective line Isc
22 kA
continuous output current
46 A at 4 kHz for normal duty
39 A at 4 kHz for heavy duty
maximum transient current
50.6 A during 60 s (normal duty)
59 A during 60 s (heavy duty)
62.1 A during 2 s (normal duty)
70 A during 2 s (heavy duty)
asynchronous motor control profile
Optimized torque mode
Variable torque standard
Constant torque standard
synchronous motor control profile
Reluctance motor
Permanent magnet motor
speed drive output frequency
0.1…599 Hz
nominal switching frequency
4 kHz
switching frequency
2…16 kHz adjustable
4…16 kHz with derating factor
safety function
STO (safe torque off) SIL 3
number of preset speeds
16 preset speeds
output voltage
<= power supply voltage
motor slip compensation
Adjustable
Automatic whatever the load
Can be suppressed
Not available in permanent magnet motor law
acceleration and deceleration ramps
S, U or customized
Linear adjustable separately from 0.01…9999 s
braking to standstill
By DC injection
protection type
Thermal protection: motor
Safe torque off: motor
Motor phase loss: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent: drive
Output overcurrent between motor phase and earth: drive
Output overcurrent between motor phases: drive
Short-circuit between motor phase and earth: drive
Short-circuit between motor phases: drive
Motor phase loss: drive
DC Bus overvoltage: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Input supply loss: drive
Exceeding limit speed: drive
Break on the control circuit: drive
electrical connection
Control: screw terminal0.2…2.5 mm²/AWG 24…AWG 12
Line side: screw terminal10…25 mm²/AWG 8…AWG 3
DC bus: screw terminal10…25 mm²/AWG 8…AWG 3
Motor: screw terminal6…25 mm²/AWG 8…AWG 3
connector type
connector(s)1 x RJ45, Modbus serial on front face
connector(s)1 x RJ45, Modbus serial for HMI on front face
physical interface
2-wire RS 485 for Modbus serial
transmission frame
RTU for Modbus serial
transmission rate
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus serial
number of addresses
1…247
data format
8 bits, configurable odd, even or no parity for Modbus serial
method of access
Slave Modbus RTU
supply
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
width
180.0 mm
height
385.0 mm
depth
249.0 mm
net weight
10.2 kg
analogue input number
2
analogue input type
AI1 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits
AI1 software-configurable temperature probe or water level sensor
AI1 software-configurable voltage: 0…10 V DC, impedance: 31.5 kOhm, resolution 12 bits
AI2 software-configurable voltage: – 10…10 V DC, impedance: 20 kOhm, resolution 12 bits
discrete input number
5
discrete input type
PTI programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
DI1…DI5 programmable, 24 V DC (<= 30 V), impedance: 4.4 kOhm
input compatibility
DI1…DI5: discrete input level 1 PLC conforming to EN/IEC 61131-2
PTI: pulse input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
discrete input logic
Positive logic (source) (DI1…DI5), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1…DI5), > 16 V (state 0), < 10 V (state 1)
Positive logic (source) (PTI), < 0.6 V (state 0), > 2.5 V (state 1)
Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
analogue output number
2
analogue output type
Software-configurable voltage AQ1: 0…10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1: 0…20 mA impedance 500 Ohm, resolution 10 bits
discrete output number
2.0
input/output type
Programmable as logic input/output DQ1: 0…1 kHz, <= 30 V DC, 100 mA
Programmable as logic input/output DQ2: 0…1 kHz, <= 30 V DC, 100 mA
relay output number
2
relay output type
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
minimum switching current
Relay output R1, R2: 5 mA at 24 V DC
maximum switching current
Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Relay output R2 on resistive load, cos phi = 1: 5 A at 250 V AC
Relay output R2 on resistive load, cos phi = 1: 5 A at 30 V DC
Relay output R2 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R2 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
isolation
Between power and control terminals
insulation resistance
> 1 MOhm 500 V DC for 1 minute to earth
noise level
56.7 dB conforming to 86/188/EEC
power dissipation in W
Natural convection: 21 W at 380 V, switching frequency 4 kHz (heavy duty)
Forced convection: 410 W at 380 V, switching frequency 4 kHz (heavy duty)
Natural convection: 23 W at 380 V, switching frequency 4 kHz (normal duty)
Forced convection: 464 W at 380 V, switching frequency 4 kHz (normal duty)
pollution degree
2 conforming to EN/IEC 61800-5-1
vibration resistance
1.5 mm peak to peak (f= 2…19 Hz) conforming to EN/IEC 60721-3-3 class 3M3
1 gn (f= 9…200 Hz) conforming to EN/IEC 60721-3-3 class 3M3
shock resistance
15 gn for 11 ms, class 3M3 conforming to EN/IEC 60721-3-3
maximum output frequency
0.599 kHz
ambient air temperature for operation
-15…50 °C without current derating (heavy duty)
-15…40 °C without current derating (normal duty)
environmental characteristic
Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
maximum input current
54.7 A
Variable speed drive application selection
Tower crane Hoisting
Other application Hoisting
Grouping conveyor Material handling
Palletizer – high performance Material handling
Cutting – high accuracy Material working (wood, ceramic, stone, pvc, metal)
Polishing Material working (wood, ceramic, stone, pvc, metal)
Grinding Material working (wood, ceramic, stone, pvc, metal)
Slitter Material working (wood, ceramic, stone, pvc, metal)
Filling bottles – synchronized operation Packaging
Feed conveyor – medium performance Packaging
Grouping boxing Packaging
Conveyor Packaging
Elevator Packaging
Other application Packaging
Standard crane – hoist Hoisting
Automatic storage / retrieval system Material handling
Shrinking wrapping Packaging
Motor power range AC-3
15…25 kW at 380…440 V 3 phases
15…25 kW at 480…500 V 3 phases
motor starter type
Variable speed drive
base load current at high overload
39.0 A
base load current at low overload
46.0 A
maximum output voltage
480 V
Environment
volume of cooling air
128.0 m3/h
operating position
Vertical +/- 10 degree
electromagnetic compatibility
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ambient air temperature for storage
-40…70 °C
operating altitude
<= 1000 m without derating
product certifications
CSA
TÜV
REACH
UL
marking
CE
noise level
56.7 dB
ambient air transport temperature
-40…70 °C
Packing Units
Package 1 Weight
11.9 kg
Package 2 Weight
11.85 kg
Package 3 Weight
36.8 kg
Offer Sustainability
Sustainable offer status
Green Premium product
REACh Regulation
REACh Declaration
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End of Life Information
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Contractual warranty
Warranty
18 months
Brands

Schneider Electric

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ATV340D18N4”

There are no reviews yet.

SHOPPING CART

close