,

ATS01N209QN

Schneider Electric

Soft starter for asynchronous motor

ATS01 – 9 A – 380..415 V – 4 KW

 

 

Compare
Main
range of product
Altistart 01
product or component type
Soft starter
product destination
Asynchronous motors
product specific application
Simple machine
device short name
ATS01
network number of phases
3 phases
[Us] rated supply voltage
380…415 V – 10…10 %
motor power kW
4 kW, 3 phases at 380…415 V
IcL starter rating
9 A
utilisation category
AC-53B conforming to EN/IEC 60947-4-2
current consumption
45 A at nominal load
type of start
Start with voltage ramp
power dissipation in W
4 W at full load and at end of starting
94 W in transient state
Complementary
assembly style
With heat sink
function available
Integrated bypass
supply voltage limits
342…456 V
supply frequency
50…60 Hz – 5…5 %
network frequency
47.5…63 Hz
output voltage
<= power supply voltage
[Uc] control circuit voltage
Built into the starter
starting time
1 s / 100
5 s / 20
10 s / 10
Adjustable from 1 to 10 s
deceleration time symb
Adjustable from 1 to 10 s
starting torque
30…80 % of starting torque of motor connected directly on the line supply
discrete input type
Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
discrete input voltage
24…40 V
discrete input logic
Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current
2 A DC-13
3 A AC-15
discrete output type
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
discrete output voltage
24 V (voltage limits: 6…30 V) open collector logic
minimum switching current
10 mA at 6 V DC for relay outputs
maximum switching current
Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type
1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
tightening torque
0.5 N.m
1.9…2.5 N.m
electrical connection
4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit
Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit
Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit
Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit
Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit
4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit
Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
marking
CE
operating position
Vertical +/- 10 degree
height
124 mm
width
45 mm
depth
131 mm
net weight
0.42 kg
compatibility code
ATS01N2
Motor power range AC-3
4…6 kW at 380…440 V 3 phases
motor starter type
Soft starter
Environment
electromagnetic compatibility
Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards
EN/IEC 60947-4-2
product certifications
GOST
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
UL
IP degree of protection
IP20
pollution degree
2 conforming to EN/IEC 60947-4-2
vibration resistance
1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity
5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation
-10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage
-25…70 °C conforming to EN/IEC 60947-4-2
operating altitude
<= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
Packing Units
Package 1 Weight
535 g
Offer Sustainability
REACh Regulation
REACh Declaration
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Contractual warranty
Warranty
18 months
Brands

Schneider Electric

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ATS01N209QN”

There are no reviews yet.

SHOPPING CART

close