Soft Starters Archives - İntegral Elektronik

ATS01N106FT

admin — Sat, 21 Nov 2020 05:14:38 +0000

Main
range of product	Altistart 01
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Simple machine
device short name	ATS01
network number of phases	1 phase
[Us] rated supply voltage	110…480 V – 10…10 %
motor power kW	3 kW, 3 phases at 400 V 0.75 kW, 3 phases at 230 V 1.1 kW, 3 phases at 230 V 2.2 kW, 3 phases at 400 V 0.75 kW, 1 phase at 230 V
motor power hp	1 hp, 3 phases at 230 V 2 hp, 3 phases at 460 V 3 hp, 3 phases at 460 V 0.5 hp, 3 phases at 210 V 1.5 hp, 3 phases at 230 V
IcL starter rating	6 A
utilisation category	AC-53B conforming to EN/IEC 60947-4-2
current consumption	30 A at nominal load
type of start	Start with voltage ramp
power dissipation in W	1 W at full load and at end of starting 31 W in transient state

Complementary
assembly style	With heat sink
function available	Integrated bypass
supply voltage limits	99…528 V
supply frequency	50…60 Hz – 5…5 %
network frequency	47.5…63 Hz
output voltage	<= power supply voltage
[Uc] control circuit voltage	110 V AC +/- 10 % at 30 mA 24 V AC/DC +/- 10 % at 25 mA 240 V AC +/- 10 % at 65 mA
starting time	1 s / 100 5 s / 20 Adjustable from 1 to 5 s
starting torque	30…80 % of starting torque of motor connected directly on the line supply
discrete output current	2 A DC-13 3 A AC-15
tightening torque	0.8 N.m
electrical connection	Cage type connector – rigid 1 2.5 mm² AWG 14 control circuit Cage type connector – rigid 1 2.5 mm² AWG 14 power circuit Cage type connector – rigid 2 1 mm² AWG 17 control circuit Cage type connector – rigid 2 1 mm² AWG 17 power circuit Cage type connector – flexible with cable end 1 2.5 mm² AWG 14 control circuit Cage type connector – flexible with cable end 1 2.5 mm² AWG 14 power circuit Cage type connector – flexible without cable end 1 2.5 mm² AWG 14 control circuit Cage type connector – flexible without cable end 1 2.5 mm² AWG 14 power circuit Cage type connector – flexible with cable end 2 0.75 mm² AWG 18 control circuit Cage type connector – flexible with cable end 2 0.75 mm² AWG 18 power circuit Cage type connector – flexible without cable end 2 1 mm² AWG 17 control circuit Cage type connector – flexible without cable end 2 1 mm² AWG 17 power circuit
marking	CE
operating position	Vertical +/- 10 degree
height	100 mm
width	23 mm
depth	100 mm
net weight	0.16 kg
compatibility code	ATS01N1
Motor power range AC-3	0.55…1 kW at 200…240 V 3 phases 1.1…2 kW at 380…440 V 3 phases 0.55…1 kW at 200…240 V 1 phase 1.1…2 kW at 200…240 V 3 phases 2.2…3 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	C-Tick CCC CSA B44.1-96/ASME A17.5 for starter wired to the motor delta terminal UL GOST
IP degree of protection	IP20
pollution degree	2 conforming to EN/IEC 60947-4-2
vibration resistance	1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity	5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	-10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage	-25…70 °C conforming to EN/IEC 60947-4-2
operating altitude	<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	178 g
Package 2 Weight	6.778 kg

Offer Sustainability
REACh Regulation	REACh Declaration
REACh free of SVHC	Yes
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Toxic heavy metal free	Yes
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Circularity Profile	End of Life Information
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS01N106FT appeared first on İntegral Elektronik.

ATS01N209QN

admin — Sat, 21 Nov 2020 05:14:32 +0000

Main
range of product	Altistart 01
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Simple machine
device short name	ATS01
network number of phases	3 phases
[Us] rated supply voltage	380…415 V – 10…10 %
motor power kW	4 kW, 3 phases at 380…415 V
IcL starter rating	9 A
utilisation category	AC-53B conforming to EN/IEC 60947-4-2
current consumption	45 A at nominal load
type of start	Start with voltage ramp
power dissipation in W	4 W at full load and at end of starting 94 W in transient state

Complementary
assembly style	With heat sink
function available	Integrated bypass
supply voltage limits	342…456 V
supply frequency	50…60 Hz – 5…5 %
network frequency	47.5…63 Hz
output voltage	<= power supply voltage
[Uc] control circuit voltage	Built into the starter
starting time	1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s
deceleration time symb	Adjustable from 1 to 10 s
starting torque	30…80 % of starting torque of motor connected directly on the line supply
discrete input type	Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
discrete input voltage	24…40 V
discrete input logic	Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current	2 A DC-13 3 A AC-15
discrete output type	Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO
discrete output voltage	24 V (voltage limits: 6…30 V) open collector logic
minimum switching current	10 mA at 6 V DC for relay outputs
maximum switching current	Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type	1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached
tightening torque	0.5 N.m 1.9…2.5 N.m
electrical connection	4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
marking	CE
operating position	Vertical +/- 10 degree
height	124 mm
width	45 mm
depth	131 mm
net weight	0.42 kg
compatibility code	ATS01N2
Motor power range AC-3	4…6 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	GOST B44.1-96/ASME A17.5 for starter wired to the motor delta terminal CCC CSA C-Tick UL
IP degree of protection	IP20
pollution degree	2 conforming to EN/IEC 60947-4-2
vibration resistance	1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity	5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	-10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage	-25…70 °C conforming to EN/IEC 60947-4-2
operating altitude	<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	535 g

Offer Sustainability
REACh Regulation	REACh Declaration
REACh free of SVHC	Yes
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Toxic heavy metal free	Yes
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS01N209QN appeared first on İntegral Elektronik.

ATS01N109FT

admin — Sat, 21 Nov 2020 05:14:26 +0000

Main
range of product	Altistart 01
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Simple machine
device short name	ATS01
network number of phases	1 phase
[Us] rated supply voltage	110…480 V – 10…10 %
motor power kW	4 kW, 3 phases at 400 V 1.5 kW, 3 phases at 230 V 1.1 kW, 1 phase at 230 V
motor power hp	1 hp, 3 phases at 210 V 2 hp, 3 phases at 230 V 5 hp, 3 phases at 460 V
IcL starter rating	9 A
utilisation category	AC-53B conforming to EN/IEC 60947-4-2
current consumption	45 A at nominal load
type of start	Start with voltage ramp
power dissipation in W	1 W at full load and at end of starting 46 W in transient state

Complementary
assembly style	With heat sink
function available	Integrated bypass
supply voltage limits	99…528 V
supply frequency	50…60 Hz – 5…5 %
network frequency	47.5…63 Hz
output voltage	<= power supply voltage
[Uc] control circuit voltage	110 V AC +/- 10 % at 35 mA 24 V AC/DC +/- 10 % at 30 mA 240 V AC +/- 10 % at 80 mA
starting time	1 s / 100 5 s / 20 Adjustable from 1 to 5 s
starting torque	30…80 % of starting torque of motor connected directly on the line supply
discrete output current	2 A DC-13 3 A AC-15
tightening torque	0.5 N.m 1.9…2.5 N.m
electrical connection	4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
marking	CE
operating position	Vertical +/- 10 degree
height	124 mm
width	45 mm
depth	131 mm
net weight	0.28 kg
compatibility code	ATS01N1
Motor power range AC-3	1.1…2 kW at 200…240 V 1 phase 2.2…3 kW at 200…240 V 3 phases 4…6 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	C-Tick B44.1-96/ASME A17.5 for starter wired to the motor delta terminal GOST CSA CCC UL
IP degree of protection	IP20
pollution degree	2 conforming to EN/IEC 60947-4-2
vibration resistance	1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity	5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	-10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage	-25…70 °C conforming to EN/IEC 60947-4-2
operating altitude	<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	343 g
Package 2 Weight	5.364 kg
Package 3 Weight	56.62 kg

Offer Sustainability
REACh Regulation	REACh Declaration
REACh free of SVHC	Yes
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Toxic heavy metal free	Yes
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Circularity Profile	End of Life Information
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS01N109FT appeared first on İntegral Elektronik.

ATS48D17Q

admin — Sat, 21 Nov 2020 05:14:20 +0000

Main
range of product	Altistart 48
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Heavy duty industry and pumps
device short name	ATS48
power supply voltage	230…415 V – 15…10 %
motor power kW	7.5 kW at 230 V connection to the motor delta terminals for standard applications 7.5 kW at 400 V connection in the motor supply line for standard applications 11 kW at 400 V connection to the motor delta terminals for severe applications 15 kW at 400 V connection to the motor delta terminals for standard applications 3 kW at 230 V connection in the motor supply line for severe applications 4 kW at 230 V connection in the motor supply line for standard applications 5.5 kW at 230 V connection to the motor delta terminals for severe applications 5.5 kW at 400 V connection in the motor supply line for severe applications
power dissipation in W	46 W for severe applications 59 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 5 In)
Icl nominal current	17 A for connection in the motor supply line for severe applications 17 A for connection in the motor supply line for standard applications 29 A for connection to the motor delta terminals for severe applications 29 A for connection to the motor delta terminals for standard applications
IP degree of protection	IP20

Complementary
assembly style	With heat sink
function available	External bypass (optional)
power supply voltage limits	195…456 V
power supply frequency	50…60 Hz – 5…5 %
power supply frequency limits	47.5…63 Hz
device connection	To the motor delta terminals In the motor supply line
factory setting current	14.8 A
[Uc] control circuit voltage	220 – 15 % to 415 + 10 %, 50/60 Hz
control circuit consumption	30 W
discrete output number	2
discrete output type	(LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO
output absolute accuracy precision	+/- 5 %
minimum switching current	10 mA at 6 V DC for relay outputs
maximum switching current	Logic output 0.2 A at 30 V DC Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms
discrete input number	5
discrete input type	PTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
starting current	0.4…1.3 Icl adjustable
analogue output type	Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
max nodes number	31
protection type	Phase failure: line Thermal protection: motor Thermal protection: starter
marking	CE
type of cooling	Natural convection
operating position	Vertical +/- 10 degree
height	275 mm
width	160 mm
depth	190 mm
net weight	4.9 kg
Motor power range AC-3	7…11 kW at 200…240 V 3 phases 7…11 kW at 380…440 V 3 phases 15…25 kW at 380…440 V 3 phases 2.2…3 kW at 200…240 V 3 phases 4…6 kW at 200…240 V 3 phases 4…6 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level A conforming to IEC 60947-4-2 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	UL CCC GOST DNV CSA NOM 117 SEPRO TCF C-Tick
vibration resistance	1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
pollution degree	Level 3 conforming to IEC 60664-1
relative humidity	0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	40…60 °C (with current derating of 2 % per °C) -10…40 °C (without derating)
ambient air temperature for storage	-25…70 °C
operating altitude	<= 1000 m without derating > 1000…2000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	5.682 kg
Package 2 Weight	58.456 kg

Offer Sustainability
Sustainable offer status	Green Premium product
REACh Regulation	REACh Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Environmental Disclosure	Product Environmental Profile
Circularity Profile	End of Life Information
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS48D17Q appeared first on İntegral Elektronik.

ATS22D62Q

admin — Sat, 21 Nov 2020 05:14:17 +0000

Main
range of product	Altistart 22
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Pumps and fans
component name	ATS22
network number of phases	3 phases
[Us] rated supply voltage	230…440 V – 15…10 %
motor power kW	15 kW 230 V 30 kW 400 V 30 kW 440 V
factory setting current	57 A
power dissipation in W	59 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 3.5 In)
IcL starter rating	62 A for connection in the motor supply line for standard applications
IP degree of protection	IP20

Complementary
assembly style	With heat sink
function available	Internal bypass
supply voltage limits	195…484 V
supply frequency	50…60 Hz – 10…10 %
network frequency	45…66 Hz
device connection	To the motor delta terminals In the motor supply line
[Uc] control circuit voltage	230 V – 15…10 % 50/60 Hz
control circuit consumption	20 W
discrete output number	2
discrete output type	Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current	100 mA at 12 V DC (relay outputs)
maximum switching current	5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs
discrete input number	3
discrete input type	(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
output current	0.4…1 Icl adjustable
PTC probe input	750 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
installed device	31
protection type	Phase failure: line Thermal protection: motor Thermal protection: starter
marking	CE
type of cooling	Forced convection
operating position	Vertical +/- 10 degree
height	295 mm
width	145 mm
depth	207 mm
net weight	12 kg
Motor power range AC-3	15…25 kW at 200…240 V 3 phases 30…50 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level A conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	C-Tick CCC UL CSA GOST
vibration resistance	1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level	45 dB
pollution degree	Level 2 conforming to IEC 60664-1
relative humidity	0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	-10…40 °C (without derating) 40…60 °C (with current derating 2.2 % per °C)
ambient air temperature for storage	-25…70 °C
operating altitude	<= 1000 m without derating > 1000…< 2000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	8.388 kg
Package 2 Weight	64 kg

Offer Sustainability
Sustainable offer status	Green Premium product
REACh Regulation	REACh Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Environmental Disclosure	Product Environmental Profile
Circularity Profile	End of Life Information
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS22D62Q appeared first on İntegral Elektronik.

ATS48D75Q

admin — Sat, 21 Nov 2020 05:14:15 +0000

Main
range of product	Altistart 48
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Heavy duty industry and pumps
device short name	ATS48
power supply voltage	230…415 V – 15…10 %
motor power kW	55 kW at 400 V connection to the motor delta terminals for standard applications 55 kW at 400 V connection to the motor delta terminals for severe applications 15 kW at 230 V connection in the motor supply line for severe applications 18.5 kW at 230 V connection in the motor supply line for standard applications 30 kW at 230 V connection to the motor delta terminals for severe applications 30 kW at 400 V connection in the motor supply line for severe applications 37 kW at 230 V connection to the motor delta terminals for standard applications 37 kW at 400 V connection in the motor supply line for standard applications
power dissipation in W	201 W for severe applications 245 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 5 In)
Icl nominal current	75 A for connection in the motor supply line for severe applications 75 A for connection in the motor supply line for standard applications 130 A for connection to the motor delta terminals for severe applications 130 A for connection to the motor delta terminals for standard applications
IP degree of protection	IP20

Complementary
assembly style	With heat sink
function available	External bypass (optional)
power supply voltage limits	195…456 V
power supply frequency	50…60 Hz – 5…5 %
power supply frequency limits	47.5…63 Hz
device connection	To the motor delta terminals In the motor supply line
factory setting current	69 A
[Uc] control circuit voltage	220 – 15 % to 415 + 10 %, 50/60 Hz
control circuit consumption	30 W
discrete output number	2
discrete output type	(LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO
output absolute accuracy precision	+/- 5 %
minimum switching current	10 mA at 6 V DC for relay outputs
maximum switching current	Logic output 0.2 A at 30 V DC Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms
discrete input number	5
discrete input type	PTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
starting current	0.4…1.3 Icl adjustable
analogue output type	Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
max nodes number	31
protection type	Phase failure: line Thermal protection: motor Thermal protection: starter
marking	CE
type of cooling	Forced convection
operating position	Vertical +/- 10 degree
height	290 mm
width	190 mm
depth	235 mm
net weight	8.3 kg
Motor power range AC-3	15…25 kW at 200…240 V 3 phases 30…50 kW at 200…240 V 3 phases 30…50 kW at 380…440 V 3 phases 55…100 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level A conforming to IEC 60947-4-2 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	DNV GOST UL NOM 117 CCC CSA C-Tick TCF SEPRO
vibration resistance	1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level	58 dB
pollution degree	Level 3 conforming to IEC 60664-1
relative humidity	0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	40…60 °C (with current derating of 2 % per °C) -10…40 °C (without derating)
ambient air temperature for storage	-25…70 °C
operating altitude	<= 1000 m without derating > 1000…2000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	9.799 kg

Offer Sustainability
Sustainable offer status	Green Premium product
REACh Regulation	REACh Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Environmental Disclosure	Product Environmental Profile
Circularity Profile	End of Life Information
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS48D75Q appeared first on İntegral Elektronik.

ATS22D47Q

admin — Sat, 21 Nov 2020 05:12:39 +0000

Main
range of product	Altistart 22
product or component type	Soft starter
product destination	Asynchronous motors
product specific application	Pumps and fans
component name	ATS22
network number of phases	3 phases
[Us] rated supply voltage	230…440 V – 15…10 %
motor power kW	11 kW 230 V 22 kW 400 V 22 kW 440 V
factory setting current	42 A
power dissipation in W	48 W for standard applications
utilisation category	AC-53A
type of start	Start with torque control (current limited to 3.5 In)
IcL starter rating	47 A for connection in the motor supply line for standard applications
IP degree of protection	IP20

Complementary
assembly style	With heat sink
function available	Internal bypass
supply voltage limits	195…484 V
supply frequency	50…60 Hz – 10…10 %
network frequency	45…66 Hz
device connection	To the motor delta terminals In the motor supply line
[Uc] control circuit voltage	230 V – 15…10 % 50/60 Hz
control circuit consumption	20 W
discrete output number	2
discrete output type	Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current	100 mA at 12 V DC (relay outputs)
maximum switching current	5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs
discrete input number	3
discrete input type	(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
discrete input voltage	24 V <= 30 V
discrete input logic	Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
output current	0.4…1 Icl adjustable
PTC probe input	750 Ohm
communication port protocol	Modbus
connector type	1 RJ45
communication data link	Serial
physical interface	RS485 multidrop
transmission rate	4800, 9600 or 19200 bps
installed device	31
protection type	Phase failure: line Thermal protection: motor Thermal protection: starter
marking	CE
type of cooling	Forced convection
operating position	Vertical +/- 10 degree
height	265 mm
width	130 mm
depth	169 mm
net weight	7 kg
Motor power range AC-3	7…11 kW at 200…240 V 3 phases 15…25 kW at 380…440 V 3 phases
motor starter type	Soft starter

Environment
electromagnetic compatibility	Conducted and radiated emissions level A conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards	EN/IEC 60947-4-2
product certifications	CCC C-Tick UL GOST CSA
vibration resistance	1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
noise level	45 dB
pollution degree	Level 2 conforming to IEC 60664-1
relative humidity	0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation	-10…40 °C (without derating) 40…60 °C (with current derating 2.2 % per °C)
ambient air temperature for storage	-25…70 °C
operating altitude	<= 1000 m without derating > 1000…< 2000 m with current derating of 2.2 % per additional 100 m

Packing Units
Package 1 Weight	5.676 kg
Package 2 Weight	69.76 kg

Offer Sustainability
Sustainable offer status	Green Premium product
REACh Regulation	REACh Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Environmental Disclosure	Product Environmental Profile
Circularity Profile	End of Life Information
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months

The post ATS22D47Q appeared first on İntegral Elektronik.