Differential Pressure Transmitters Archives - İntegral Elektronik

DWYER Series AT-605 ATEX/IECEx Approved Magnehelic® Differential Pressure Indicating Transmitter

admin — Tue, 02 Mar 2021 21:24:37 +0000

The Series AT-605 ATEX/IECEx Approved Magnehelic® Differential Pressure Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure in hazardous locations. An easy-to-read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design simplifies any 4-20 mA control loop powered by a 10-35 VDC supply. Flameproof enclosures are available in aluminum and can include a glass window for viewing process pressure on the gage face.

The post DWYER Series AT-605 ATEX/IECEx Approved Magnehelic® Differential Pressure Indicating Transmitter appeared first on İntegral Elektronik.

DWYER Series AT-DH3 Approved Digihelic® Differential Pressure Controller

admin — Tue, 02 Mar 2021 21:24:36 +0000

The Series AT-DH3 ATEX/IECEx Approved Digihelic® Differential Pressure Controller is a 3-in-1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output. Combining these three features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for hazardous area pressure, velocity and flow applications by allowing for the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4-20 mA process output. In velocity or flow modes, a square root output is provided on the 4-20 mA signal to coincide with the actual flow curve. Flameproof enclosures are available in aluminum and can include a glass window for viewing process information and set point status on the digital display.

The post DWYER Series AT-DH3 Approved Digihelic® Differential Pressure Controller appeared first on İntegral Elektronik.

DWYER Series AT-MS ATEX/IECEx Approved Magnesense® Differential Pressure Transmitter

admin — Tue, 02 Mar 2021 21:24:34 +0000

The Series AT-MS ATEX/IECEx Approved Magnesense® Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure and air velocity in hazardous areas. This transmitter is loaded with features such as: field selectable English or metric ranges, field upgradeable LCD display, adjustable dampening of output signal and the ability to select a square root output for use with pitot tubes and other similar flow sensors. Along with these features, the magnetic sensing technology provides exceptional long term performance and enables the Magnesense® transmitter to be the solution for a myriad of pressure and flow applications. Flameproof enclosures are available in aluminum and can include a glass window for viewing process on the LCD.

The post DWYER Series AT-MS ATEX/IECEx Approved Magnesense® Differential Pressure Transmitter appeared first on İntegral Elektronik.

DWYER Series 616KD-LR Differential Pressure Transmitter – Low Ranges

admin — Tue, 02 Mar 2021 21:20:21 +0000

The Series 616KD-LR Differential Pressure Transmitter is designed for simplicity, making it the ideal choice for installers and maintenance professionals. These low range instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.

The post DWYER Series 616KD-LR Differential Pressure Transmitter – Low Ranges appeared first on İntegral Elektronik.

DWYER Series 3500 Smart Differential Pressure Transmitter

admin — Tue, 02 Mar 2021 21:20:20 +0000

The Series 3500 Smart Differential Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The Series 3500 is capable of being configured for differential pressure or level applications with the zero and span buttons. A field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3500 can be configured to be ATEX or IECEX approved for use in hazardous (classified) locations. The rangeability allows the smart transmitter to be configured to fit any application.

The post DWYER Series 3500 Smart Differential Pressure Transmitter appeared first on İntegral Elektronik.

DWYER Series 629HLP Differential Pressure Transmitter

admin — Tue, 02 Mar 2021 21:20:19 +0000

The Series 629HLP Differential Pressure Transmitters are suitable for measuring over-pressure, under-pressure, and differential pressure in compatible gases and liquids with 1% accuracy. The 629HLP is suitable for all measuring tasks in commercial, industrial or sanitary applications. Its single sensor design allows it to measure small increment pressure changes, and converts them to a linear analog output signal from 4 to 20 mA or 0 to 10 VDC.

The post DWYER Series 629HLP Differential Pressure Transmitter appeared first on İntegral Elektronik.

DWYER Series MSX Magnesense® Differential Pressure Transmitter

admin — Tue, 02 Mar 2021 21:20:18 +0000

The Series MSX Magnesense® Differential Pressure Transmitter combines the stability and versatility of the original Series MS2 Magnesense® II transmitter for use in building control applications. The MSX simplifies the ordering process to deliver the desired configuration, which reduces product setup time. Pressure ranges are available in Pa, mm w.c., and in w.c. All pressure ranges can be configured in unidirectional or bidirectional modes, providing a total of 32 ranges. The MSX transmitter can provide a linear pressure output or a linear velocity output with the square root extraction from the transmitter. Additional parameters have been included to expand the square root capability for calculating flow. Dual voltage and milliamp output signals can be used to provide both control and equipment output signal verification.

The post DWYER Series MSX Magnesense® Differential Pressure Transmitter appeared first on İntegral Elektronik.

DWYER Series MSX Pro Magnesense® Differential Pressure Transmitter

admin — Tue, 02 Mar 2021 21:20:17 +0000

The Series MSX Pro Magnesense® Differential Pressure Transmitter is the professional differential pressure transmitter meeting stringent industry standards with innovative global product design. The device has exceptional stability for use in critical building performance applications with the popular versatility of our original Series MS2 Magnesense® II transmitter. The MSX Pro simplifies the ordering process to deliver the desired configuration, which reduces product setup time. Pressure ranges of Pa, mm w.c., and in w.c. are available per device. All pressure ranges can be configured in unidirectional or bidirectional modes providing a total of 32 ranges. The MSX Pro transmitter can provide a linear pressure output or a linear velocity output with the square root extraction from the transmitter. Additional parameters have been included to expand the square root capability to calculate flow. Dual voltage and milliamp output signals can be used to provide control and equipment output signal verification.

The post DWYER Series MSX Pro Magnesense® Differential Pressure Transmitter appeared first on İntegral Elektronik.

DWYER Model DevCom2000

admin — Tue, 02 Mar 2021 21:12:07 +0000

The Model DevCom2000 HART® Communicator Software turns your PC into a full-featured HART® communicator. Now it is possible to configure transmitters and control valves at the desktop or in the field. DevCom2000 uses device descriptions (DDs) to retrieve data that is stored in the memory of smart field devices. This software is a simple, reliable and secure method to add new measurement values to control systems without the need of additional wires. This software eliminates the need to purchase and maintain a separate handheld HART® communicator.

The post DWYER Model DevCom2000 appeared first on İntegral Elektronik.

DWYER Series MS2 Magnesense® II Differential Pressure Transmitter

admin — Tue, 02 Mar 2021 21:12:06 +0000

The Series MS2 Magnesense® II Differential Pressure Transmitter combines stable piezo sensing technology with the additional features to reduce installation time and simplify ordering. Like the original Series MS, the second generation transmitter can be used as a linear pressure output or a linear velocity output with the square root extraction done in the transmitter. Additional parameters have been included on the MS2 to expand the square root capability to include flow measurements.

The post DWYER Series MS2 Magnesense® II Differential Pressure Transmitter appeared first on İntegral Elektronik.